Introduction: Hydraulic systems are considered one of the most important types of mechanical systems, as they are characterized by the ability to convert a small force to another greater force, without the need for gears, and with a size less than the sizes needed by other mechanical systems, all of which made hydraulic systems the …
Introduction: With industrial developments, the task of oils is no longer confined to reducing friction and reducing the temperature resulting from friction. Rather, it transcends it to new tasks to meet precise and vital requirements such as transferring impurities, protecting equipment from rust and reducing the sounds of moving parts. Therefore, oils varied according to …
Management of oil systems in iron and steel companies Read More »
Introduction: Programmable logic controllers (PLCs) belong to the computer family and are a microprocessor used to control various processes such as controlling machines and controlling various industrial processes.These controllers have the ability to store instructions to perform various control functions such as data processing, timing, counting, displacement, equipment communication and control. Course target: Developing the …
Introduction: SCADA system is a system that collects data from the accounts placed in the control system and sends it to the main computer for management, control and monitoring. It is an abbreviation (SCADA) Supervisory Control and data acquisition and changes the nature of operations according to each system. Course target: Raising the efficiency of …
Introduction: Electric motors are one of the important components of electrical loads, which are widely used in factories to move production lines. The speeds of the motors vary according to the nature of production. Therefore, an electronic control unit is installed, which is an electrical circuit designed to control the speed and direction of rotation …
Introduction: Welding is a permanent connection of metal parts using heat, and in order for the connection between the two parts to be welded to be a good one, there must be closeness between the atoms of the two parts to be connected so that common metal crystals are formed that achieve that connection, and …
Welding technology, manufacturing and quality testing Read More »
Introduction: Over the years, companies have used various anti-corrosion systems to protect iron, such as epoxy coating and other types of protective coatings. But these systems provide limited protection for a specific period of time, and with the passage of time the coating loses its durability, so companies resorted to galvanization, which is the …
No. Program name 48 Industrial software systems Siemens smitc S7. 49 Types of electric motors, their performance and the avoidance of their malfunctions. 50 Applications of automated control systems in production processes. 51 Maintenance and operation of electrical power distribution stations. 52 Maintenance and operation of electrical power distribution stations. 53 Electrical circuit breakers – …
No. Program name 37 Diesel generator operation and maintenance. 38 Air compressors – types – uses – operation and maintenance. 39 Technology of using oils and greases in maintenance. 40 Rolling bearings: types – lubrication – maintenance – analysis of their malfunctions – repair – calculation of the life span. 41 Analysis of breakdowns of …
Magazine Figure : Tarik Bouslama Click on the image below to download
Aden Steel Company Yemen They are one of the leading companies in the field of reinforcing bars in Yemen. The company was established in 2007. They also buy reinforcing bars from the Turkish market. The company owns a rolling unit and a reinforcing bars unit. The total annual sales volume is less than 100,000 dollars. …
Introduction: The electric oven is a large steel vessel lined with refractory bricks covered with the roof, and in it, there are three holes that go through it the electrodes that perform the electric arc process, which generate a high temperature reaches 3000 degrees, which leads to the fusion of the scrap. Course Target: Discovering …
George Matta, Chairman of the Economic Committee of the Arab Iron and Steel Union and chief marketing officer in for Ezz Steel, said that steel consumption in the Middle East and North Africa area is expected to reach 40 million tons in 2019 ,With a decrease of 7% compared to 2018, which reached 43 million tons due to the …
Chairman of the Economic Committee of ِAISU : Steel consumption reaches 40 million tons Read More »
The Chairman of the Board of Directors of the Arab Iron and Steel Union, Awwad Al-Khalidi, called on Arab governments to provide more support “to protect this strategic industry.” In a speech during the 14th Arab Steel Summit hosted by Tunisia, Al-Khalidi stressed the need to strengthen Arab cooperation in the field of iron and …
George Matta, head of the Economic Committee of the Arab Steel Union and head of the marketing sector at Ezz Group, confirmed that Egypt is the largest producer and consumer of steel in the Arab region and North Africa, and that it leads economic growth in the Arab region, noting that the growth rate reached …
Economic Committee of AISU : Government measures helped reduce Arab steel stocks Read More »
The expectations of the growth rates of the Middle East and North Africa region for 2019 decreased from 1.5% to 0.6%, due to the following reasons: Oil prices drop below $60 a barrel Not starting projects for the reconstruction of Syria and Iraq Continuing military operations in Syria and Yemen – political instability This is …
Today, the annual conference of the Arab Iron and Steel Union (the 14th Arab Steel Summit) was concluded in Tunis. 250 participants from Arab and foreign steel companies, including rebar producers, flat and steel pipe producers, technology equipment suppliers, consultants, analysts, and major investors, participated in this conference. In addition to the presence of some …
There is no excerpt because this is a protected post.
Arab Iron and Steel Union concluded the second meeting of the Economic Committee in Casablanca – Morocco, which was held during the period from 14 to 15 October. During the meeting, they reviewed and examined the economic situation in the Arab countries and the most important decisions that affected the steel industry in the Arab …
Arab Iron and Steel Union will hold the second meeting of the Union Economic Committee in Casablanca, Morocco from 14-15 October 2019. This Economic Committee is one of the most important committees of the Arab Iron and Steel Union, which aims to study the situation of the iron and steel industry and its implications for …
Arab Iron and Steel Union holds the Second Economic Committee meeting in Casablanca Read More »
There is no excerpt because this is a protected post.
The Middle East and North Africa region is expected to witness modest growth rates, averaging between 1.5% and 3.5% during the period from 2019 to 2021, compared to 1.6% in 2018. Over the past years, the countries of the region have witnessed large inflation rates as a result of economic reforms, reducing government subsidies on …
Summary of the first report The Economic Committee of the Arab Iron and Steel Union Read More »
The Arab Iron and Steel Union (AISU) held its annual meetings of the 120th Ordinary Session of the Board of Directors and the 52nd Ordinary Session of the General Assembly in Kuwait City / Kuwait on April 24, 2019 in the presence of representatives of the member iron and steel companies to discuss the annual …
The first meeting of the Economic Committee of Arab Iron and Steel Union was held in Cairo on 20 February. The meeting was attended by 12 members from 9 Arab countries: Egypt, Algeria, Kuwait, UAE, Saudi Arabia, Jordan, Libya, Tunisia, Morocco. The Economic Commission is one of the most important committees of Arab Iron and …
First Economic Committee Meeting of the Arab Iron and Steel Union in Egypt Read More »
Arab Iron and Steel Union held the 13th Arab Steel Summit in Amman, Jordan, the first meeting of the Economic Committee. During the meeting, Mr. George Matta, Chief Marketing Officer of the Ezz Steel Group, was elected as Chairman of the Economic Committee, and Mr. Hassan El Melagy, Commercial Director of Coordination and Development, , Vice Chairman …
George Matta is Chairman of the Economic Committee of Arab Iron and Steel Union Read More »
