Customs tariff HS code
HEADING NO | H.S CODE | DESCRIPTION |
|
| I.- PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM |
7201 |
| Pig iron and spiegeleisen in pigs, blocks or other primary forms. |
| 72011000 | – Non-alloy pig iron containing by weight 0.5% or less of phosphorus: |
| 72012000 | – Non-alloy pig iron containing by weight more than 0.5% of phosphorus |
| 72015000 | – Alloy pig iron; spiegeleisen |
7202 |
| Ferro-alloys. |
|
| – Ferro-manganese : |
| 72021100 | – – Containing by weight more than 2% of carbon |
| 72021900 | – – Other |
|
| – Ferro-silicon : |
| 72022100 | – – Containing by weight more than 55% of silicon |
| 72022900 | – – Other |
| 72023000 | – Ferro-silico-manganese |
|
| – Ferro-chromium : |
| 72024100 | – – Containing by weight more than 4% of carbon |
| 72024900 | – – Other |
| 72025000 | – Ferro-silico-chromium |
| 72 02 60 00 | – Ferro-nickel |
| 72 02 70 00 | – Ferro-molybdenum |
| 72028000 | – Ferro-tungsten and ferro-silico-tungsten |
|
| – Other : |
| 72029100 | – – Ferro-titanium and ferro-silico-titanium |
| 72029200 | – – Ferro-vanadium |
| 72029300 | – – Ferro-niobium |
| 72029900 | – – Other |
7203 |
| Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %,in lumps, pellets or similar forms. |
| 72 03 10 00 | – Ferrous products obtained by direct reduction of iron ore |
| 72039000 | – Other |
7204 |
| Ferrous waste and scrap; remelting scrap ingots of iron or steel. |
| 72041000 | – Waste and scrap of cast iron |
|
| – Waste and scrap of alloy steel : |
| 72042100 | – – Of stainless steel |
| 72 04 29 00 | – – Other |
| 72 04 30 00 | – Waste and scrap of tinned iron or steel |
|
| – Other waste and scrap : |
| 72 04 41 00 | – – Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles |
| 72 04 49 00 | – – Other |
| 72 04 50 00 | – Remelting scrap Ingots |
7205 |
| Granules and powders, of pig iron, spiegeleisen, iron or steel. |
| 72051000 | – Granules |
|
| – Powders : |
| 72052100 | – – Of alloy steel |
| 72052900 | – – Other |
|
| II.- IRON AND NON-ALLOY STEEL |
7206 |
| Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). |
| 72061000 | – Ingots |
| 72069000 | – Other |
7207 |
| Semi-finished products of iron or non-alloy steel. |
|
| – Containing by weight less than 0.25% of carbon : |
| 72071100 | – – Of rectangular (including square) cross-section, the width measuring less than twice the thickness |
| 72071200 | – – Other, of rectangular (other than square) cross-section |
| 72071900 | – – Other |
| 72072000 | – Containing by weight 0.25% or more of carbon |
7208 |
| Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. |
| 72081000 | – in coils, not further worked than hot-rolled, with patterns in relief |
|
| – Other, in coils, not further worked than hot-rolled, pickled : |
| 72082500 | – – Of a thickness of 4.75 mm or more |
| 72082600 | – – Of a thickness of 3 mm or more but less than 4.75 mm |
| 72082700 | – – Of a thickness of less than 3 mm |
|
| – Other, in coils, not further worked than hot-rolled : |
| 72083600 | – – Of a thickness exceeding 10 mm |
| 72083700 | – – Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 72083800 | – – Of a thickness of 3 mm or more but less than 4.75 mm |
| 72083900 | – – Of a thickness of less than 3 mm |
| 72084000 | – Not in coils, not further worked than hot-rolled, with patterns in relief |
|
| – Other, not in coils, not further worked than hot-rolled : |
| 72085100 | – – Of a thickness exceeding 10 mm |
| 72085200 | – – Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 72085300 | – – Of a thickness of 3 mm or more but less than 4.75 mm |
| 72085400 | – – Of a thickness of less than 3 mm |
| 72089000 | – Other |
7209 |
| Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. |
|
| – In coils, not further worked than cold-rolled (cold-reduced) : |
| 72091500 | – – Of a thickness of 3 mm or more |
| 72091600 | – – Of a thickness exceeding 1 mm but less than 3 mm |
| 72091700 | – – Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 72091800 | – – Of a thickness of less than 0.5 mm |
|
| – Not in coils, not further worked than cold-rolled (cold-reduced) : |
| 72092500 | – – Of a thickness of 3 mm or more |
| 72092600 | – – Of a thickness exceeding 1 mm but less than 3 mm |
| 72092700 | – – Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 72092800 | – – Of a thickness of less than 0.5 mm |
| 72099000 | – Other |
7210.00 |
| Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. |
|
| – Plated or coated with tin : |
| 72101100 | – – Of a thickness of 0.5 mm or more |
| 72101200 | – – Of a thickness of less than 0.5 mm |
| 72102000 | – Plated or coated with lead, including terne-plate |
| 72103000 | – Electrolytically plated or coated with zinc |
|
| – Otherwise plated or coated with zinc : |
| 72104100 | – – Corrugated |
| 72104900 | – – Other |
| 72105000 | – Plated or coated with chromium oxides or with chromium and chromium oxides |
|
| – Plated or coated with aluminium : |
| 72106100 | – – Plated or coated with aluminium-zinc alloys |
| 72106900 | – – Other |
| 72107000 | – Painted, varnished or coated with plastics |
| 72109000 | – Other |
7211 |
| Flat-rolled products of iron or non-alloy steel, of’ a width of less than 600 mm, not clad, plated or coated. |
|
| – Not further worked than hot-rolled : |
| 72111300 | – – Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief |
| 72111400 | – – Other, of a thickness of 4.75 mm or more |
| 72111900 | – – Other |
|
| – Not further worked than cold-rolled (cold-reduccd) : |
| 72112300 | – – Containing by weight less than 0.25% of carbon |
| 72112900 | – – Other |
| 72119000 | – Other |
7212 |
| Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. |
| 72121000 | – Plated or coated with tin |
| 72122000 | – Electrolytically plated or coated with zinc |
| 72123000 | – Otherwise plated or coated with zinc |
| 72124000 | – Painted, varnished or coated with plastics |
| 72125000 | – Otherwise plated or coated |
| 72126000 | – Clad |
7213 |
| Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. |
| 72131000 | – Containing indentations, ribs, grooves or other deformations produced during the rolling process |
| 72132000 | – Other, of free-cutting steel |
|
| – Other : |
| 72139100 | – – Of circular cross-section measuring less than 14 mm in diameter |
| 72139900 | – – Other |
7214 |
| Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded,but including those twisted after rolling. |
| 72141000 | – Forged |
| 72142000 | – Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling |
| 72143000 | – Other, of free-cutting steel |
|
| – Other : |
| 72149100 | – – Of rectangular (other than square) cross-section |
| 72149900 | – – Other |
7215 |
| Other bars and rods of iron or non-alloy steel. |
| 72151000 | – Of free-cutting steel, not further worked than cold-formed or cold-finished |
| 72155000 | – Other, not further worked than cold-formed or cold-finished |
| 72159000 | – Other |
7216 |
| Angles, shapes and sections of iron or non-alloy steel. |
| 72161000 | – U, I or H sections, not further worked than hot-rolled, hotdrawn or extruded, of a height of less than 80 mm |
|
| – L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm : |
| 72162100 | – – L sections |
| 72162200 | – – T sections |
|
| – U, I or H sections, not further worked than hot-rolled, hotdrawn or extruded of a height of 80 mm or more : |
| 72163100 | – – U sections |
| 72163200 | – – I sections |
| 72163300 | – – H sections |
| 72164000 | – L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more |
| 72165000 | – Other angles, shapes and sections, not further worked than hotrolled, hot-drawn or extruded |
|
| – Angles, shapes and sections, not further worked than coldformed or cold-finished : |
| 72166100 | – – Obtained from flat-rolled products |
| 72 16 69 00 | – – Other |
|
| – Other : |
| 72169100 | – – Cold-formed or cold-finished from flat-rolled products |
| 72169900 | – – Other |
7217 |
| Wire of iron or non-alloy steel. |
| 72171000 | – Not plated or coated, whether or not polished |
| 72172000 | – Plated or coated with zinc |
| 72173000 | – Plated or coated with other base metals |
| 72179000 | – Other |
|
| III.- STAINLESS STEEL |
7218 |
| Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. |
| 72181000 | – Ingots and other primary forms |
|
| – Other : |
| 72189100 | – – Of rectangular (other than square) cross-section |
| 72189900 | – – other |
7219 |
| Flat-rolled products of stainless steel, of a width of 600 mm or more. |
|
| – Not further worked than hot-rolled, in coils : |
| 72191100 | – – Of a thickness exceeding 10 mm |
| 72191200 | – – Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 72191300 | – – Of a thickness of 3 mm or more but less than 4.75 mm |
| 72191400 | – – Of a thickness of less than 3 mm |
|
| – Not further worked than hot-rolled, not in coils : |
| 72192100 | – – Of a thickness exceeding 10 mm |
| 72192200 | – – Of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 72192300 | – – Of a thickness of 3 mm or more but less than 4.75 mm |
| 72192400 | – – Of a thickness of less than 3 mm |
|
| – Not further worked than cold-rolled (cold-ruduced) : |
| 72193100 | – – Of a thickness of 4.75 mm or more |
| 72193200 | – – Of a thickness of 3 mm or more but less than 4.75 mm |
| 72193300 | – – Of a thickness exceeding 1 mm but less than 3 mm |
| 72193400 | – – Of a thickness of 0.5 mm or more but not exceeding 1 mm |
| 72193500 | – – Of a thickness of less than 0.5 mm |
| 72199000 | – Other |
7220.00 |
| Flat-rolled products of stainless steel, of a width of less than 600 mm. |
|
| – Not further worked than hot-rolled : |
| 72201100 | – – Of a thickness of 4.75 mm or more |
| 72201200 | – – Of a thickness of less than 4.75 mm |
| 72 202000 | – Not further worked than cold-rolled (cold-reduced) |
| 72209000 | – Other |
7221 | 72210000 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. |
7222 |
| Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. |
|
| – Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : |
| 72221100 | – – Of circular cross-section |
| 72221900 | – – Other |
| 72222000 | – Bars and rods, not further worked than cold-formed or cold-finished |
| 72223000 | – Other bars and rods |
| 72224000 | – Angles, shapes and sections |
7223 | 72230000 | Wire of stainless steel. |
|
| IV.- OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL |
7224 |
| Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. |
| 72241000 | – Ingots and other primary forms |
| 72249000 | – Other |
7225 |
| Flat-rolled products of other alloy steel, of a width of 600 mm or more. |
|
| – Of silicon-electrical steel : |
| 72251100 | – – Grain-oriented |
| 72251900 | – – Other |
| 72253000 | – Other, not further worked than hot-rolled, in coils |
| 72254000 | – Other, not further worked than hot-rolled, not in coils |
| 72255000 | – Other, not further worked than cold-rolled (cold-reduced) |
|
| – Other : |
| 72259100 | – – Electrolytically plated or coated with zinc |
| 72259200 | – – Otherwise plated or coated with zinc |
| 72259900 | – – Other |
7226 |
| Flat-rolled products of other alloy steel, of a width of less than 600 mm. |
|
| – Of silicon-electrical steel : |
| 72261100 | – – Grain-oriented |
| 72261900 | – – Other |
| 72262000 | – Of high speed steel |
|
| – Other : |
| 72269100 | – – Not further worked than hot-rolled |
| 72269200 | – – Not further worked than cold-rolled (cold-reduced) |
| 72269900 | – – Other |
7227 |
| Bars and rods, hot-rolled, in irregularly wound coiLs, of other alloy steel. |
| 72271000 | – Of high speed steel |
| 72272000 | – Of silico-manganese steel |
| 72279000 | – Other |
|
| Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. |
| 72281000 | – Bars and rods, of high speed steel |
| 72282000 | – Bars and rods, of silico-manganese steel |
| 72283000 | – Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded |
| 72284000 | – Other bars and rods, not further worked than forged |
| 72285000 | – Other bars and rods, not further worked than cold-formed or cold-finished |
| 72286000 | – Other bars and rods |
| 72287000 | – Angles, shapes and sections |
| 72288000 | – Hollow drill bars and rods |
7229 |
| Wire of other alloy steel . |
| 72292000 | – Of silico-manganese steel |
| 72299000 | – Other |
Reports
Related reports
